Skip to Content

Blog Archives

Syncro AX

SYNCRO AX positioner for single-axis system.
It can control either DC motors, servo-brushless, stepping motors, AC motor, by means of outputs available: — analog — step and direction — on / off.

SYNCRO AX is a positioner for single-axis systems, actuated by means of DC or brushless servomotors, AC motors ON / OFF or inverter, stepping motors or hydraulic proportional system. High performance and reliability, combined with optoisolated inputs, the high-visibility display and large input keys _ make SYNCRO AX also suitable for being installed in harsh environments. The hardware configuration of SYNCRO AX makes it particularly suitable for applications in which the axis must be synchronized, through a further input to the reading for incremental encoder, with  the material feed or with the spindle rotation , such as flying shears, _ electrical shafts etc.

SYNCRO AX can be provided with many standard software packages . Furthermore the customer can develop his own software or refer to SIDAC’s software for specific applications.

sidac-system


  • CPU 196 INTEL (16 bit)
  • Alphanumeric LCD display with two 16 – character lines, back lighted, character height 8.5 mm
  • Polycarbonate thermoformed keyboard of high tactile sensitivity
  • RS 232 serial line
  • Analog output for drives – 10… + 10 Vdc 12 bit; auxiliary analog output – 10… + 8 bit (from 1 to 5 milliseconds refreshing time according to the software version)
  • 4 analog input 0…5 Vdc or 0…10 Vdc 8 bit (optional)
  • 2 position readout input through incremental and bidirectional transducers (encoders or optical scales) + zero, Line-driver 5 or 12 Vdc (on request)
  • Control of phase failure or encoder fault
  • Counting frequency of encoder over 500 KHz
  • Positioning field +/- 2.000.000.000
  • 24 configurable digital I/O, PNP, 24 Vdc, 100 mA (Note: whether each point is an input or an output it is defined by the software)
  • Configuration parameters and dynamic trimming which may be settable through software
  • Buffered RAM memory (10 years)
  • Eprom flash memory for application programs
  • Power supply +/- 15%; 250 mA
Dmensioni modulo assi

Syncro AX   Dimension

 


BASIC SOFTWARE

  • Basic Software
  • Editor with guided menus and sub-menus
  • Manual motion (Continuous, Jog, Preset)
  • Set up and trimming for all parameters (Work-speed and acceleration, speed and acceleration of machine zero-point search, backlash and offset compensation, etc.)
  • Password differenziate per accesso ai menu di set up
  • Entering of programs (blocks) via keyboard or serial line RS 232
  • High-level programming for integrated PLC, on exyernal PC, via user-guided software, with graphic utilities for setup and testing.

APPLICATION SOFTWARE 

  • Application software
  • Linear axis (different versions)
  • Rotary axis (table or dividing head)
  • Tool-changer magazine for machine tools
  • Shears, cutters
  • Sheet-press loaders
  • Flying knives
  • Electric drive shafts
  • Thread-cutters
  • Winders
  • Strap winders
  • Counters (8 independent counts)
  • Special software on request (developable also by the costumer)

 

 

0 Continue Reading →

Graphic / Compax

COMPAX/GRAFICO is a family of Positioners having 1 to 3 axes with built-in PLC for numerically-controlled ositioning on drive axes actuated by DC servo-motors, brushless motors, AC motors (on/off or inverter-controlled type), stepping motors and proportional hydraulic systems. COMPAX/GRAPH is built by using the minimum configuration of the CNC multi-axis ystems manufactured by SIDAC by utilizing the same modular hardware.

Therefore, it mantaines the same performances and reliability of the higher-levelled products and also the feature of suitability for heavy-duty ambients. The different hardware models, which SIDAC proposes, can be provided with standard software at customer’s choice according to the numerous versions avaiable for the market. The customer can develop his own customized software or refer to SIDAC’s software for specific applications. The field of application is very wide: from the classical machine tool to general automation in every industrial field. For any motion wherever an axis must be moved with precision and repeatability and where easy and immediate setting of a dimension or a program containing sizes is required, COMPAX/GRAPH is suitable for this kind of application so to solve the usual problems caused by traditional techniques which today have become obsolete. Despite its low price, the particular keyboard size and the graphic display make this Positioner very suitable also for high-class machines. Moreover, the modularity of COMPAX/GRAPH, composed by operator interface and Axes/plc module, makes up an interesting advantage for every kind of installation.

sidac-system


  • CPU 196 INTEL (16 bit) o 960 INTEL (32 bit)
  • Graphic LCD display, 35×130 mm, backlighted (with 8 lines of 40 columns, for alphanumerical use)
  • Polycarbonate thermo-formed keyboard of high tactile sensitivity
  • RS 232 serial line
  • Analog outputs for drive 0…+/-10 Vdc 12 bit (refreshing time from 1 to 5 milliseconds according to the software version)
  • Position read-out by incremental transducers (encoders or optical scales) bidirectional + zero, Line-driver 5 or 12 Vdc
  • Input for electronic handwheel 2-phase, 5 Vdc
  • Input for “RATE” potentiometer
  • Control of phase failure or encoder fault
  • Counting frequency of encoder over 500 KHz
  • Position range +/- 2.000.000.000
  • Configurable digital I/O, PNP (NPN on request), 24 Vdc, 100 mA (note: the software defines for each point whether it is input or output)
  • Configuration parameters and dynamic trimming settable by software
  • Buffered RAM memory (10 years)
  • Eprom flash memory for application programs
  • Power supply 24 Vcc +/- 15%; 350 mA
Dimensione Compax Grafico

Dimension

Dmensioni modulo assi

Dimension of Axis module


BASIC SOFTWARE

  • Editor with guided menus and submenus
  • Manual motion (Continuous, Jog, Preset)
  • Set up and trimming for all function parameters (work-speed and acceleration, speed and acceleration of machine zero-point search, backlash and offset compensation, etc.)
  • Differentiated Password for access to set up menus
  • Entering of programs (blocks) via keyboard or RS 232 serial line

APPLICATION SOFTWARE

  • Linear Axis (different versions)
  • Rotary Axis (table or dividing head)
  • Tool-changer magazine for machine tools
  • Shears, cutter
  • Flying shear
  • Electric drive shaft
  • Thread-cutter
  • Winder
  • Strap winder
  • Punching lines with 4/8 work heads
  • Sheet-presses
  • Surface grinders
  • Special software on request (developable also by customer)

MANUALE LIN102GRver7


APPLICATIONS
The field of application is very wide: from classic machine tool to the generic automation of any sector.
COMPAX / GRAPHIC finds its place in all applications where it is needed: accuracy, repeatability, easy and immediate setting of a share or of a quota scheme.

EXAMPLES OF APPLICATIONS ALREADY MADE:

SPECIAL AND TANGENTIAL GRINDING

controllo-numerico-per-rettificatrici-tangenziali-speciali

PLOTTER, CARTESIAN ROBOTS, PALLETIZERS, MANIPULATORS, SPECIAL ROBOTS

controllo-numerico-punzonatrici-roditricicontrollo-numerico-punzonatrici-roditrici

UNWINDING, STRAIGHTENING AND CUT-TO-LENGHT SHEET METAL FOR COILS




 

 

0 Continue Reading →