MicroCompax MA100 is a stand-alone single-axis Positioner module, which is responsible for the control of hydraulic actuator with proportional valve, through 4/20 mA loop. It is presented as a “blind” device, characterized by a plastic container to be fitted directly inside the electrical panel, on a DIN rail.
Equipped with multi-coloured indicator LEDs for easy diagnostics and putting into service, it can be reconfigured on-site, using a USB port and a special software installed on Windows systems
This mdule has two current loop inputs and two current loop outputs. An input and an output are dedicated to driving the valve, and to reading the position feedback.
An input can be used as a setpoint input, to control the valve remotely.
An output is configured as a monitor of the valve position, to allow a remote viewing of the correct implementation of the setpoint commands.
|Power supply||VDC||18 ÷ 30|
|MAX Absorption||mA||< 100|
|Position command||mA||4 ÷ 20 (Rin = 240 Ω)|
|Positioning accuracy||% FS||0,01|
|Feedback signal||mA||4 ÷ 20 (Rin = 240 Ω)|
|Monitor output||mA||4 ÷ 20 (Rout = max 1000 Ω)|
|Profile control||In space loop (position, speed, acceleration)|
|Interface||USB (Standard-B) for parametrization, programming, monitor, remote assistance|
|Electromagnetic compatibility (EMC)||2004/108/CE Immunity EN 61000-6-2 Emission EN 61000-6-4|
|Digital inputs||N||8 IN: optoisolati (logica PNP)|
|Digital outputs||N||8 OUT: optically isolated (high side switch logic – 0,625 A)|
|Status signals||Multi coloured LED and N flashes|
|Operating temperature range||°C||-20 ÷ +60|
|Casing material||IP 20|
|Materiale dell’involucro||Thermoplastic polyamid|
|Dimensions||mm||100(B) x 125(H) x 35(P)|